Publications

Books

Wyatt, J.E., (2024). CNC Machining Processes: A Guide to Machine Tools and Programming. Preliminary Edition. Cognella, Solana Beach CA. ISBN 979-8-8233-0102-2

Journal Articles (* indicates student author)

Velamakuri NSC*, Myers OJ, Wyatt JE (2018) Numerical Analysis Conducted During the Study on the Impact of Tool-Chip Contact Time on the Shear Angle in Orthogonal Machining. Int J Metall. Met Phys 3:012.

Velamakuri, N.S*., Myers, O., Wyatt, J. (2017). Understanding the impact of tool-chip engagement time on the shear angle in orthogonal cutting. International Journal of New Technologies in Science and Engineering. Vol. 4 (3)

Wyatt, J. E., Velamakuri, N. S. C*., & Myers, O. J. (2018). Statistical analysis conducted during the study on the impact of tool-chip contact time on the shear angle in orthogonal machining. Advances in Materials and Processing Technologies, 1–19.  https://doi.org/10.1080/2374068X.2017.1420289

Wyatt, J.E. & Berry J.T. (2009). Mapping of superficial residual stresses in machined components. Journal of Industrial Technology, 25 (4).    http://atmae.org/jit/Articles/wyatt101609.pdf

Wyatt, J. E., Berry, J. T., & Williams, A. R.* (2007). Residual stresses in aluminum castings [Special Issue]. Journal of Materials Processing Technology, 191, 170-173

Wyatt, J. E., Berry, J. T., & Williams, A. R.* (2007). Measurement of superficial residual stresses in the casting of aluminum alloys using a new low-cost technique [Electronic Version]. Transactions of the American Foundry Society, 115.

Wyatt, J. E., & Trmal, G. J. (2006, July-September). Plunge cut grinding simplified: An Illustrative student experiment. Journal of Industrial Technology, 22 (3). http://www.nait.org/jit/Articles/wyatt063006.pdf

Trade Publications

Smith, G. T. & Wyatt, J. E. (1999, May). Ultra-high speed face milling. Metalworking Production, 37 & 38.

Refereed Presentations with Proceedings Papers (* indicates student author)

Patole, S, Wyatt, J.E (2024). Application of arena simulation for effective teaching of value stream mapping in undergraduate lean six sigma class. Presented at the 2024 ATMAE National Conference. October 25-27. Atlanta, GA.

Wyatt, J.E., Patole, S. (2024). Beating the machine: Overcoming problems with AI writing engines. Presented at the 2024 ATMAE National Conference. October 25-27. Atlanta, GA.

Patole, S, Wyatt, J.E., Morgan, K. (2022). Developing a holistic master’s program in industrial technology focused on data and industry 4.0. Presented at the 2022 ATMAE National Conference, Driving Technology Forward, Louisville, KY. November 8-11

Wyatt, J.E., Walker, R. (2021). Data driven recruiting to improve university retention. Presented at the ATMAE Annual Conference. Building Blocks for the Future Workforce. November 3-5. Orlando, FL

Wyatt, J.E., Walker, R. (2021). Game of Thrones - Defeating the dragons with unicorns. Presented at the ATMAE Annual Conference. Building Blocks for the Future Workforce. November 3-5. Orlando, FL

Wyatt, J.E., King, S.K., Justice, C., Walker, R., Martindale, T. (2020, November). Developing K-12 Career Pathways for Advanced Manufacturing Technical Positions. Given at Championing Change through Education. The 2020 Joint Conference of the Association of Technology, Management, and Applied Engineering and the International Association of Journals and Conferences. November 4-6, Virtual Conference.

Wyatt, J. E. (2020, February). Getting Teachers to Communicate with Students on the Students Preferred Platform. In Mississippi Educational Computing Association. Jackson, MS.

Wyatt, J.E. Walker, R., (2019, November). Who gives the best advice? The influencing factors in a student’s career path. Presented at the ATMAE Annual Conference, Fueling the Fourth Industrial revolution: Industry 4.0, Charlotte, North Carolina.

Wyatt, J.E. Walker, R., (2018). Issues with recruitment for both 2- and 4-year technology programs in a predominantly agricultural state. Presented at the ATMAE Annual Conference, The Future Starts Here. November 7-9, Kansas City, Mo.

Walker, R. Wyatt, J.E., (2017). Building our workforce for tomorrow: the application of reverse curricula mapping to align employment expectations to education and training in the manufacturing sector. Presented at the 50th ATMAE Annual Conference, Constructing a Future for Tomorrow. November 1-3, Cincinnati, OH.

Walker, R. Wyatt, J.E., (2017). Reverse curricula mapping: linking coursework to employer expectations. 2nd Annual Advancing Mississippi Conference. June 8. Jackson, MS.

Velamakuri, N.S.C*., Myers, O.J. & Wyatt, J.E., (2016). Statistical analysis conducted during the study on the impact of tool-chip contact time on the shear angle in orthogonal machining. Presented at the Advanced material processing & technologies conference. November 8-11. Kuala Lumpur, Malaysia

Wyatt, J.E. (2015). The hybrid program: The key to unlocking the “glass ceiling”. Building Bridges. Association of Technology, Management, and Applied Engineering national conference. November 11-14. Pittsburgh, PA. pp. 230-235

Wyatt, J. E., Myers, O.J. (2015). A new way of looking at shear angle from the standpoint of tool/chip engagement time. Building Bridges. Association of Technology, Management, and Applied Engineering national conference. November 11-14. Pittsburgh, PA.

Wyatt, J.E., Brocato, K., Kirkland, A., Knight, A. (2015). Developing a mentoring program: Developing a mentoring plan for faculty based on existing platforms. New Perspectives in Mentoring: A Quest for Leadership, Excellence, and Innovation. 8th Annual Mentoring Conference. October 20-23. University of New Mexico. Albuquerque, NM. pp. 1249-1253

Wyatt, J.E. Giordano, M. (2014). Using Automation Studio to expand face-to-face laboratory facilities and to construct an online classroom.  Technology-Tomorrow’s Gateway. Association of Technology, Management, and Applied Engineering national conference. November 19-21. St. Louis, MO.

Wyatt, J.E. Giordano, M. (2014). Offering online courses, the first-year review: Where do we go now? Technology-Tomorrow’s Gateway Association of Technology, Management, and Applied Engineering national conference. November 19-21. St. Louis, MO.

Earle, M.T., Wyatt, J.E. (2014). Preparing to teach STEM in middle school using understanding by design framework: focus on using CAD in creative arts. IEEE Integrate STEM Conference. March 8th, Princeton, NJ.

Wyatt, J.E. Giordano, M. (2013). A newcomer’s view to distance education: Do’s don’ts and, pitfalls. Developing the Future Workforce. Association of Technology, Management, and Applied Engineering national conference. November 21-22. New Orleans, LA.         

Wyatt, J.E., Myers, O., Berry, J.T. (2013). A study of component surface refurbishment. IEEE International Symposium on Assembly and      Manufacturing. July 30th – August 2nd, Xi’an, China. pp.245 - 247.            http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6643537                doi: 10.1109/ISAM.2013.6643537

Wyatt, J.E., Berry, J.T. (November 2011). Mapping of superficial residual stresses in both machined and cast components. 2011 ATMAE Annual Conference. November 9-12, Cleveland, OH.

Wyatt, J.E., Berry, J.T. (February 2011). Shaped castings and machining. 2011 Annual Meeting and Exhibition of The Minerals, Metals & Materials Society. February 27- March 3, San Diego, CA

Wyatt, J.E., Berry, J.T. (October 2010). Have technology programs succeeded where engineering programs have failed? 2010 ATMAE Annual Conference. October 26-30, Panama City Beach, FL. pp. 330-334.

Berry, J.T., Altan, T. & Wyatt J.E. (April 2010). Whatever happened to product realization? Will technology programs succeed where engineering programs have failed? American Society for Engineering Education Southeastern Section Annual Conference. April 18-20, Virginia Polytechnic Institute and State University, VA.

Berry, J.T., Patton, R., Wyatt, J.E. & Qatu, M. (March 2010). The incorporation of materials Selection into the design sequence in a mechanical engineering curriculum. Information Technology in Support of Materials Education. Stevens Institute of Technology. Hoboken, NJ

Wyatt. J.E., & Lawrence, H.* (2008, November). The role of hybrid course structures in industrial technology. Presented at "Globalization of Technology - Imagine the Possibilities!” The 2008 NAIT Annual Conference. November 18-22, Nashville, TN.

Wyatt, J. E., Berry, J. T., & Westfall, A. H.* (2007, July).  Surface mapping of residual stresses. Paper presented at the 5th International Conference on Materials Processing Defects, Cornell Center for Materials Research, Cornell University, NY.

Wyatt, J. E., Berry, J. T., & Williams, A. R.* (2007, May). Measurement of superficial residual stresses in the casting of aluminum alloys using a new low-cost technique. Paper presented at the 111th Metal Casting Congress, Houston, TX.

Wyatt, J. E., Smith, G. T., & Berry, J. T. (2006, October). Surface characterization and the functionality of mating parts. Paper presented at the ASME International Conference on Manufacturing Science and Engineering (MSEC), Ypsilanti, MI.

Wyatt, J. E., Berry, J. T., & Williams, A. R.* (2006, July). Residual stresses in aluminum castings. Paper presented at the International Conference on Advances in Materials and Processing Technology, Las Vegas, NV.

Wyatt, J. E. (2005, May). A new method for the determination of superficial residual stress. Appendix to Klauba, B. B., Adams, C. M., & Berry, J. T. (2005, May). Vibratory stress relief: Methods used to monitor and document effective treatment, a survey of users and directions for further research. Paper presented at the ASM Trends in Welding Conference, Atlanta, GA.

Smith, G. T., Littlefair, G., Wyatt, J. E., Berry, J. T., Hills, M. J.*, & Loughlin, J.* (2003, July). Ultra-high-speed turning on a vertical machining center of aerospace aluminium alloys. Paper presented at Laser Metrology and Machine Performance IV (LAMDAMAP), (pp. 35-43), Huddersfield University, United Kingdom.

Smith, G. T., Wyatt, J. E., & Hope, A. D. (1998, November). Ultra-high speed face milling of stainless steels utilising large dual-plane balanced cutters. Behaviour of Materials in Machining – Opportunities and Prospects for Improved Operations, (pp. 199-207), Stratford-Upon-Avon, United Kingdom.

Smith, G. T., Littlefair, G., & Wyatt, J. E. (1998, May). High speed machining strategies. Paper Presented at the International High Speed Machining Technical Conference - Society of Manufacturing Engineers, Institute of Advanced Manufacturing Sciences, Cincinnati, OH.

Other Presentations & Proceedings (* indicates student author)

Wyatt, J. E., & Berry, J. T. (2006, September). A low-cost method for determining superficial residual stresses as applied to machined surfaces. Paper Presented at the 6th International Conference on Industrial Tooling, Mississippi State University & East Mississippi Community College, MS.

Wyatt, J. E., Berry, J. T., Syrotuck, D., * & Johnson, A.* (2003, September) A novel technique for the determination of macro-level residual stresses. Paper presented at the 5th International Conference on Industrial Tooling, Southampton Institute, (pp. 185-195), United Kingdom.

Jocelyn, A., Wyatt, J. E., Lanham, J., Flower, T., Nash, D., & Sawyers, D. (2002, June). A Novel approach to the superplastic forming and diffusion bonding of multi-sheet constantly variable geometry aerospace components. Paper Presented at the 2nd European Superplastic Forming Conference, Bristol, United Kingdom.

Trmal, G. J. & Wyatt, J. E. (2001, September).  Model for predicting torque and thrust force and its application in monitoring drilling operations. Paper presented at the 4th International Conference on Industrial Tooling, (pp. 201-210), Southampton Institute, United Kingdom.

Wyatt, J. E. (1999, September). Ultra-high speed face milling. Paper presented at the 3rd International Conference on Industrial Tooling, Southampton Institute, United Kingdom.

Wyatt, J. E. (1997, September). A novel approach to the ultra-high-speed milling of stainless steels and other components. Paper presented at the 2nd International Conference on Industrial Tooling, Southampton Institute, United Kingdom. 

Patents and Invention Disclosures

Berry, J. T., & Wyatt, J. E. (2005, August). A low-cost method for determining superficial residual stresses as applied to machined surfaces. US Patent No. 6,934,642.

Wyatt, J. E., Berry J. T., & Kasper, C. (2005). System, apparatus, and method for determining in-service deformation in a gasketed flange system. Invention Disclosure No. 05-1123-199.

Wyatt, J. E., & Berry, J. T. (2005). Service integrity for normal & disaster restart (SINDeR). Invention Disclosure No. 05-1020-184.

Wyatt, J. E., & Berry, J. T. (2005). Determination of the tension and torque applied to fastener technology. Invention Disclosure No. 04-1213-126.

Wyatt, J. E., Berry, J. T., & Kasper, C. (2004). Method for determining the life cycle of a compressible gasket. Invention Disclosure No. 04-0903-115.

Berry, J. T., & Wyatt, J.E. (2003). Method for determining superficial residual stress as applied to machined, mechanically or thermally processed surfaces. Invention Disclosure No. 03-0409-49.

Invited Workshops

Berry, J.T. & Wyatt, J.E. (2010, January). Current aluminum casting technology for precision components. Presented at the Center for Advanced Vehicular Systems Extension (Canton MS). Exclusively for Eaton Aerospace.

Wyatt, J. E. (2006, September). High speed machining. Presented at the 6th International Conference on Industrial Tooling, Mississippi State University & East Mississippi Community College, MS.

Wyatt, J. E., Lanham, J. (2001, November) Machining for the 21st Century Seminar. Presented at the Production Engineering Research Association (PERA), Melton Mowbray, United Kingdom. 

Poster Sessions

Wyatt, J. E., & Berry, J. T. (2004, December). A new technique for the determination of superficial residual stresses associated with machining and other manufacturing processes. Poster session presented at The Intellectual Property Forum and Technology Expo. Jackson, MS.

Wyatt, J. E., Berry, J. T., & Kasper, C. (2004, December). A new technique for the lifecycle analysis of compressible gaskets utilized in the petrochemical industry. Poster session presented at The Intellectual Property Forum and Technology Expo. Jackson, MS.

Panels

Wyatt, J.E., King, S.K., Justice C., Walker, R. (2020, November). Working with K-12 Teachers and Counselors to Develop Career Pathways for Advanced Manufacturing. Panel Session. Given at Championing Change through Education. The 2020 Joint Conference of the Association of Technology, Management, and Applied Engineering and the International Association of Journals and Conferences. November 4-6, Virtual Conference.

White Papers

Wyatt, J. E. (2007) The environmentally friendly high-speed machining of magnesium and aluminum alloys.

Berry, J. T., Wyatt, J. E., & Wipf, D. (2002, November). An investigation of the purported environmentally assisted embrittlement of ductile irons. Submitted to the Ductile Iron Society.